Muby Chem Logo
ISO-9001-2008 Certified Company

Home/Products            On Line Enquiry            Contact/E-mail

Product Links:  Zinc Chloride      Ammonium Chloride      Calcium Chloride      Potassium Chloride      Sodium Acetate      Sodium Thiosulphate or Sodium Thiosulfate     Sodium Chloride      Magnesium Chloride     Mono & Di Ammonium Phosphate      Mono Di & Tri Sodium Phosphate       Mono Di & Tri Potassium Phosphate      Iron Sulphide or Ferrous Sulfide      Sodium Bromide      Potassium Bromide      Zinc Sulfate or Zinc Sulphate      PCB Etchant or Ammonical Etchant      Zinc Ammonium Chloride Galvanizing Flux      Sodium Di-Acetate     Sodium Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate      Sodium Monochloro Acetate or Sodium Chloroacetate     Aromatic & Perfumery     Oil Field Chemicals

For Sodium Chloride Buying Click here

 

Sodium Chloride MSDS

 

Section 1 - Chemical Product and Company Identification

MSDS Name: Sodium Chloride
Synonyms: Common salt; Halite; Rock salt; Saline; Salt; Sea salt; Table salt.

Section 2 - Composition, Information on Ingredients

 

CAS#

Chemical Name

Percent

EINECS/ELINCS

7647-14-5

Sodium chloride

ca.100

231-598-3

Hazard Symbols: None listed.
Risk Phrases:
None listed.

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Appearance: colorless or white. Caution! Sodium Chloride may cause eye and skin irritation. May cause respiratory tract irritation.
Target Organs: No data found.
Potential Health Effects
Eye:
Sodium Chloride may cause eye irritation.
Skin:
Sodium Chloride may cause skin irritation.
Ingestion:
Sodium Chloride ingestion of large amounts may cause gastrointestinal irritation. Ingestion of large amounts may cause nausea and vomiting, rigidity or convulsions. Continued exposure can produce coma, dehydration, and internal organ congestion.
Inhalation:
Sodium Chloride may cause respiratory tract irritation.
Chronic: No information found.

Section 4 - First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. Wash mouth out with water.
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: None

Section 5 - Fire Fighting Measures

General Information: Water runoff can cause environmental damage. Dike and collect water used to fight fire. Wear appropriate protective clothing to prevent contact with skin and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact with thermal decomposition products. Substance is noncombustible.
Extinguishing Media: For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.

Section 6 - Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation.

Section 7 - Handling and Storage

Handling: Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale.
Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: Good general ventilation should be sufficient to control airborne levels. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Exposure Limits

Chemical Name

ACGIH

NIOSH

OSHA - Final PELs

Sodium chloride

none listed

none listed

none listed

OSHA Vacated PELs: Sodium chloride: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear safety glasses with side shields.
Skin: Wear appropriate gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: A NIOSH/MSHA approved air purifying dust or mist respirator or European Standard EN 149.

Section 9 - Physical and Chemical Properties

Physical State: Solid
Appearance: colorless or white
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: 2575 deg F
Freezing/Melting Point:1474 deg F
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Decomposition Temperature: Not available.
NFPA Rating: (estimated) Health: 1; Flammability: 0; Reactivity: 0
Explosion Limits, Lower: Not available.
Upper: Not available.
Solubility: Soluble.
Specific Gravity/Density:2.165
Molecular Formula: ACL
Molecular Weight:58.43

Section 10 - Stability and Reactivity

Chemical Stability: Stable.
Conditions to Avoid: High temperatures, exposure to moist air or water.
Incompatibilities with Other Materials: Reacts with most no noble metals such as iron or steel, building materials (such as cement), bromine, or trifluoride. Potentially explosive reaction with dichloromaleic anhydride + urea. Electrolysis of mixtures with nitrogen compounds may form explosive nitrogen trichloride.
Hazardous Decomposition Products: Toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information

RTECS#:
CAS# 7647-14-5: VZ4725000
LD50/LC50:
CAS# 7647-14-5:
Draize test, rabbit, eye: 100 mg Mild;
Draize test, rabbit, eye: 100 mg/24H Moderate;
Draize test, rabbit, eye: 10 mg Moderate;
Draize test, rabbit, skin: 50 mg/24H Mild;
Draize test, rabbit, skin: 500 mg/24H Mild;
Inhalation, rat: LC50 = >42 gm/m3/1H;
Oral, mouse: LD50 = 4 gm/kg;
Oral, rat: LD50 = 3 gm/kg;
Skin, rabbit: LD50 = >10 gm/kg;<BR.

Carcinogenicity:
CAS# 7647-14-5: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Epidemiology: No information reported.
Teratogenicity: An experimental teratogen.
Reproductive Effects: Human reproductive effects by intraplacental route: terminates pregnancy. Experimental reproductive effects.
Neurotoxicity: No information reported.
Mutagenicity: See actual entry in RTECS for complete information.
Other Studies: No information reported.

Section 12 - Ecological Information

Ecotoxicity: No data available. No information found.
Environmental: No information reported.
Physical: No information found
Other: No information found

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

 

 

US DOT

IATA

RID/ADR

IMO

Canada TDG

Shipping Name:

No information available.

 

 

 

No information available.

Hazard Class:

 

 

 

 

 

UN Number:

 

 

 

 

 

Packing Group:

 

 

 

 

 

 

Section 15 - Regulatory Information


US FEDERAL


TSCA
CAS# 7647-14-5 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
SARA

Section 302 (RQ)
None of the chemicals in this material have an RQ.
Section 302 (TPQ)
None of the chemicals in this product have a TPQ.
SARA Codes
CAS # 7647-14-5: acute.
Section 313
No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants. This material does not contain any Class 1 Ozone depletors. This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA. None of the chemicals in this product are listed as Priority Pollutants under the CWA. None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
CAS# 7647-14-5 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California No Significant Risk Level: None of the chemicals in this product are listed.
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols:
Not available.
Risk Phrases:


Safety Phrases:

S 24/25 Avoid contact with skin and eyes.

WGK (Water Danger/Protection)

CAS# 7647-14-5: 0
Canada
CAS# 7647-14-5 is listed on Canada's DSL List. CAS# 7647-14-5 is listed on Canada's DSL List.
This product has a WHMIS classification of D2B.
CAS# 7647-14-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits

Section 16 - Additional Information

Disclaimer:
************************************************************************************************************
Our company provides this Sodium Chloride MSDS information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium Chloride MSDS document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. OUR COMPANY MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH IN THIS MSDS OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, OUR COMPANY WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS MSDS.
************************************************************************************************************

  

Potassium Bromide Logo

For more information contact manufacturer at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA.
TEL: (OFFICE) 91-22-23770100, 23774610, 23726950, 23723564. FAX: 91-22-23728264.

 e-mail: info@mubychem.com

Cell Call to Anmol: +91-9821870100 or Ambrish: +91-9821570100

Home/Products            On Line Enquiry            Contact/E-mail

Copyright and Usual Disclaimer is Applicable.
Last updated: September 20, 2009

 

http://mubychem.com

Zinc Chloride 

Ammonium Chloride  

Calcium Chloride 

Potassium Chloride 

Sodium Chloride 

Sodium Thiosulphate India Manufacturer Sodium Thiosulfate

Sodium Acetate 

Sodium Chloride